Share this product

Eastwood Underhood Black Single Stage Automotive Car Paint Urethane Quart Kit

This product ad may change over time

Share

Eastwood Underhood Black Single Stage Automotive Car Paint Urethane Quart Kit

Eastwood's premium Single-Stage Acrylic Urethane Topcoat provides exceptional long-lasting beauty and durability. Catalyzed urethane for unsurpassed durability; Highly resistant to UV rays, chemicals, chips; Makes 1 sprayable quart when mixed 3:1 with a required activator; Approximate coverage: 30 SQ FT;Max Temperature: Paint will han…

New content will be added above the current area of focus upon selection

Eastwood's premium Single-Stage Acrylic Urethane Topcoat provides exceptional long-lasting beauty and durability. Catalyzed urethane for unsurpassed durability; Highly resistant to UV rays, chemicals, chips; Makes 1 sprayable quart when mixed 3:1 with a required activator; Approximate coverage: 30 SQ FT;Max Temperature: Paint will handle up to 300 degrees without delamination, but color shift may occur, so it should not be used in a high heat setting Perfect 20-25% gloss finishThis premium 2-component topcoat system is blended with top-quality raw materials and advanced composition coatings technology. Superior to acrylic, alkyd and lacquer coatings. Eastwood's single-stage urethane paints hold their gloss longer and won't yellow. SINGLE-STAGE PAINT MIXING RATIOSThoroughly mix three parts single-stage urethane paint with one part Activator. No additional reduction is required but can be used as needed.Use caution in mixing materials as Eastwoods single-stage urethane paint may begin to gel after approximately two hours (at 70 F). PAINT GUN SET-UPHVLP Gun: Fluid Tip 1.3-1.5 mm Inlet Spray Pressure 25-30 psi Conventional Gravity: Fluid Tip 1.3-1.6 mm Inlet Spray Pressure 45-50 psi Conventional Siphon: Fluid Tip: 1.4-1.8 mm Inlet Spray Pressure 45-50 psiAPPLICATION INSTRUCTIONSApply single-stage urethane paints in two to three medium wet coats as necessary to achieve sufficient coverage, allowing ten minute flash between coats. Additional coats may be necessary to achieve total coverage for some metallic colors. A final fog coat may be applied with metallic colors to help set an even flake pattern and /or adjust flake orientation. A dry film thickness of approximately 2 mil is recommended. Paint should be dust free within 10-15 minutes and tack-free within one hour (at 70 F). Re-coat anytime after the previous coat has flashed, or before 18 hours. After 18 hours, paint should be abraded prior to re-coating for proper adhesion purposes. This urethane paint may be applied as a stand-alone single-stage system, or in combination with Eastwoods High Solids Urethane Clear as a basecoat/clearcoat system. Additionally, Urethane Clear may be integrated into Urethane color. When combining the two systems, be sure to activate each side (the paint and the clear) separately, with their own activators at the correct mix ratios, before blending. When used as a Single-Stage Urethane Paint, this coating may be wet-sanded and polished for increased depth and gloss like any other urethane topcoat. Care should be taken when lightly cutting metallic colors to prevent disturbing aluminum flake.

See more below

E

Eastwood.com

$76.96

Visit site

Description

Eastwood's premium Single-Stage Acrylic Urethane Topcoat provides exceptional long-lasting beauty and durability. Catalyzed urethane for unsurpassed durability; Highly resistant to UV rays, chemicals, chips; Makes 1 sprayable quart when mixed 3:1 with a required activator; Approximate coverage: 30 SQ FT;Max Temperature: Paint will handle up to 300 degrees without delamination, but color shift may occur, so it should not be used in a high heat setting Perfect 20-25% gloss finishThis premium 2-component topcoat system is blended with top-quality raw materials and advanced composition coatings technology. Superior to acrylic, alkyd and lacquer coatings. Eastwood's single-stage urethane paints hold their gloss longer and won't yellow. SINGLE-STAGE PAINT MIXING RATIOSThoroughly mix three parts single-stage urethane paint with one part Activator. No additional reduction is required but can be used as needed.Use caution in mixing materials as Eastwoods single-stage urethane paint may begin to gel after approximately two hours (at 70 F). PAINT GUN SET-UPHVLP Gun: Fluid Tip 1.3-1.5 mm Inlet Spray Pressure 25-30 psi Conventional Gravity: Fluid Tip 1.3-1.6 mm Inlet Spray Pressure 45-50 psi Conventional Siphon: Fluid Tip: 1.4-1.8 mm Inlet Spray Pressure 45-50 psiAPPLICATION INSTRUCTIONSApply single-stage urethane paints in two to three medium wet coats as necessary to achieve sufficient coverage, allowing ten minute flash between coats. Additional coats may be necessary to achieve total coverage for some metallic colors. A final fog coat may be applied with metallic colors to help set an even flake pattern and /or adjust flake orientation. A dry film thickness of approximately 2 mil is recommended. Paint should be dust free within 10-15 minutes and tack-free within one hour (at 70 F). Re-coat anytime after the previous coat has flashed, or before 18 hours. After 18 hours, paint should be abraded prior to re-coating for proper adhesion purposes. This urethane paint may be applied as a stand-alone single-stage system, or in combination with Eastwoods High Solids Urethane Clear as a basecoat/clearcoat system. Additionally, Urethane Clear may be integrated into Urethane color. When combining the two systems, be sure to activate each side (the paint and the clear) separately, with their own activators at the correct mix ratios, before blending. When used as a Single-Stage Urethane Paint, this coating may be wet-sanded and polished for increased depth and gloss like any other urethane topcoat. Care should be taken when lightly cutting metallic colors to prevent disturbing aluminum flake.

Specifications

Formula	Acrylic Urethane Topcoat with Activator
Coverage area	Approximate coverage: 30 SQ FT
Durability	Catalyzed urethane for unsurpassed durability; Highly resistant to UV rays, chemicals, chips
Features	Catalyzed urethane for unsurpassed durability; Highly resistant to UV rays, chemicals, chips; Perfect 20-25% gloss finish; 2-component topcoat system; Single-stage or basecoat/clearcoat system options; Wet-sandable and polishable; Metallic colors with even flake pattern and orientation
Drying Time	Dust free within 10-15 minutes and tack-free within one hour
Brand	Eastwood
Compatibility	Eastwood's High Solids Urethane Clear as a basecoat/clearcoat system or integrated into Urethane color
Finish	Gloss
Form	Liquid
Application Method	Paint gun
Application	Spray
Color	Underhood Black
Coverage	Approximate coverage: 30 SQ FT